Concrete & Masonry Finishes

TK PRODUCTS
SURECRETE

High-performance finishes for autoclaved aerated concrete, concrete, stucco, and masonry building systems

A multi-story apartment building with beige and light yellow exterior, large windows, and a small courtyard with green grass, plants, and a sidewalk, under a blue sky with some clouds.
A colorful abstract drawing with vibrant hues of pink, yellow, orange, red, and purple, forming a complex, artistic pattern.
TK Products logo in black and white.
request a quote
REQUEST SUBMITTALS

TK TRI-SHEEN
CONCRETE SURFACER

TK-5321 (smooth), TK-5319 (fine), TK-5301 (medium), TK-5691 (coarse)

A 100% acrylic, a non-cementitious protective coating that provides a durable and attractive textured finish for a variety of decorative surfaces, including autoclaved aerated concrete fence panels, stucco finish coat, and concrete tilt panels. Available in three texture grades (fine, medium, and coarse) and standard or custom color options.

  • Ready-to-use and requires no primer prior to application.

  • One-component formulation eliminates the possibility of on-site mixing/measuring errors, uneven textures or film failures.

  • Excellent alternative to multi-component dry plaster mix products.

  • Will not fade, chip, crack, peel or support mildew growth.

  • Helps control efflorescence and salt leaching.

  • Excellent resistance to a road and/or deicing salts.

  • Breathable film allows trapped moisture to pass through successfully without loosening or peeling the coating.

  • Provides color uniformity and long-lasting color retention.

  • Low maintenance – sheds dirt easily and stays cleaner, longer.

A beige block wall with textured surface and decorative stone columns at the ends, with a background of green leafy trees and a ground of brown dirt and grass.

TK Tri-Sheen concrete surfacer (medium texture) was applied to the AAC privacy fence at the H-E-B Grocery Processing Facility in San Antonio, Texas.

Download Product Data Sheet

TK TRI-LASTIC
PROTECTIVE ACRYLIC COATING

TK-5610 (smooth), TK-5611 (fine), TK-5612 (medium)

An elastomeric, protective coating with high-quality acrylic resins for use on autoclaved aerated concrete wall panels, decorative concrete, masonry, and stucco. Available in three texture grades (smooth, fine, medium), TK-TRI-LASTIC provides water repellency, durability, and flexibility throughout a wide range of temperatures and conditions. 

Features:

✓ Excellent elongation and recovery properties that allow it to bridge hairline cracks and move with the substrate.

✓ Excellent resistance to stains, dirt, air-borne pollutants, acids, alkali, and degradation from freeze/thaw cycles.

✓ Forms a water-repellent film which is impermeable to wind-driven rain, yet is permeable to water vapor, which could otherwise cause moisture damage.

✓ Contains no plasticizers and will not become hard or brittle through many years of exposure.

✓ Excellent UV resistance and long-term color retention.

Construction site showing a building with a beige stucco exterior and a partially built section with green insulating panels on the right side. Clear blue sky overhead.
Construction workers and Genie boom lifts working on a large building wall during daytime under a clear blue sky.

TK Tri-Lastic was used as an elastomeric final finish over AAC wall panels for the Texas Pickle Hall project in Live Oak, Texas.

Download Product Data Sheet
A large, white, multi-story beach house with a wrap-around porch and a staircase leading up to the front door, surrounded by a white picket fence and green lawn, with palm trees in the background and a bright blue sky.
A pastel-colored, multi-story seaside house with a white picket fence, lush green lawn, and palm trees in the background, under a partly cloudy blue sky.
A multi-story beach house with light blue siding, white trim, and a porch with white railings and columns. Lawn and white picket fence in the foreground, palm trees in the background, under a clear blue sky.

TK TRI-SHEEN ACRYLIC
PREMIUM EXTERIOR COATING

TK-5342

A 100% acrylic, breathable masonry coating that promotes surface adhesion and color retention for a long-lasting decorative finish. TK-TRI-SHEEN ACRYLIC may be used alone or combined with surfacing texturizing products for increased color uniformity and stability. Available in standard and custom color options.

Features:

  • Will not fade, chip, crack, peel, or support mildew growth.

  • Resistant to degradation caused by ultraviolet light.

  • Low maintenance – sheds dirt easily and stays cleaner, longer.

  • Breathable film allows trapped moisture to pass through successfully without loosening or peeling the coating.

  • Provides color uniformity and long-lasting color retention.

  • Meets Federal Specification TTP 19

Download Product Data Sheet

TK TRI-SHEEN
PIGMENTED STAIN

TK-5272

A low viscosity, semi-opaque, acrylic emulsion designed for cementitious and wood surfaces. Its acrylic resins and unique formulation create a uniformly colored finish that lasts. Available in standard and custom color options.

Features:

  • Provides color uniformity and long-lasting color retention.

  • Breathable film allows trapped moisture to pass through successfully without loosening or peeling the coating.

  • Odor free and VOC compliant, making it ideal for both interior and exterior applications.

  • Acts as a protective shield against substrate damage due to abrasion, weathering and surface degradation.

Close-up of a beige brick column flanked by white walls and green grass at the bottom, with building windows and vents in the background.
Download Product Data Sheet

OTHER PRODUCTS

Modular is a Texas distributor for TK Products and Surecrete

WE can provide all the products in their extensive catalogs.

* TK Products and Surecrete are trademarks of The Sierra Company, LLC

TK Products

Surecrete

Request a PROJECT EVALUATION

Let us review your project to determine which TK Products or Surecrete
concrete and masonry finish is the right one for your needs.

start your project evaluation